Make your do it your self projects easier with this straight top plate.
- For use in multiple applications
- Quick mount style table leg appropriate hardware option
- 2.4375 L x 2.4375 W
- Steel
| Weight | 0.4 kg |
|---|---|
| Dimensions | 11.5 × 0.525 × 5.25 cm |
| Brand | Waddell |
12 reviews for Waddell 2.4375-in x 2.4375-in Metal Table Leg Straight Top Plate (4-Pack)
Add a review
Related products
Chair Leg Tips & Furniture Glides
$6.88
Chair Leg Tips & Furniture Glides
$4.48
$5.98
Chair Leg Tips & Furniture Glides
$4.48
Chair Leg Tips & Furniture Glides
$6.88
Chair Leg Tips & Furniture Glides
Style Selections Anti-skid 10-Pack 2-in Black Rubber Leveling Glides
$6.98
$7.68
Anonymous –
One broke when simply hand tightening it
Anonymous –
Piece that holds the threading broke off literally minutes after installing.
Anonymous –
Everything is good
Anonymous –
Worked perfect.
Anonymous –
Make a TV stand for a DVR under a TV add the legs with these plates easy to install and it all turned put great.
Anonymous –
The screws included were really low quality. I predrilled holes and the heads snapped off of at least 5 of the 16. If they had quality hardware I would have given them a really good rating as they work as they should otherwise.
Anonymous –
Product didn’t have the screw sizes on the package. Had to buy all new screws for the plates
Anonymous –
These are simple to use. Wife wanted a light weight table between the dryer and freezer. Picked up the wood for the top, the legs, and these plates at Lowe’s. Took me less than an hour to make this table custom fitted for the space. Only thing left to do is paint it.
Anonymous –
I wanted a table leg plate that would place the leg at about a 30 degree angle, which is common in MCM design. Even though the plate LOOKS angled, the threaded part of the plate is basically at 90 degrees, so the leg doesn’t look angled at all.
Anonymous –
On three of these bracket plates, the threaded center portion snapped right out during the assembly. Not bearing a load, simply in the assembly. Very slight torque in any direction is too much and the center of the bracket pops right out. One of the breaks was rotational when screwing in the leg. Cranked it hand tight and pulled the threads out of the bracket. Would never recommend these delicate flowers.
Anonymous –
These 4 metal plates are an easy way to turn any flat surface into a table top. Just add 4 legs that each has a 5/16” bolt extending from top of leg. Since the legs easily unscrew, this type table is easy to transport and then setup in indoor or outdoor area. And your table can be any size that meets your needs.
Anonymous –
While they Provided proper attachment of legs to board it was possible to change the angle slightly by pushing on the end of the leg. This could be problematic without other attachment to the legs to steady them.