This angle top plate can be used to mount leg at an angle.
- Makes do it yourself projects easy
- Woodworker style table leg appropriate hardware option
- 2.4375 L x 1.125 diameter
- Steel
| Weight | 0.35 kg |
|---|---|
| Dimensions | 11.5 × 0.525 × 5.25 cm |
| Brand | Waddell |
20 reviews for Waddell 2.4375-in x 2.4375-in Metal Table Leg Angle Top Plate (4-Pack)
Add a review
Related products
$6.88
$5.98
$4.98
Chair Leg Tips & Furniture Glides
$3.38
Chair Leg Tips & Furniture Glides
Style Selections Anti-skid 10-Pack 2-in Black Rubber Leveling Glides
$6.98
Furniture Hardware
Waddell 2.4375-in x 2.4375-inMetal Table Leg Straight Top Plate
$4.22
Anonymous –
I liked that they are angled. Adds stability to the project
Anonymous –
I’ve bought this product twice to angle my table legs outward. I didn’t care care for the fact that i trusted the packaging the first time and then accidentally dropped this package in a gravel parking lot and couldn’t find air the screws. But I did like it enough to buy it a second time. However I can take comfort that in a sealed package, and not dropping it twice, I found that even though there are 16 holes to secure the four brackets, there were only thirteen screws in the sealed package.
Anonymous –
I refinished a gun cabinet for my husband as a anniversary gift and fancied it up a bit with some legs which I used these to attached at the corners on the bottom. Recommended if you are doing a similar job.
Anonymous –
Although this product doesn’t appear to be very well constructed, I purchased them on July 20, 2020 at my local to go along with the four beautiful Waddell wooden taper legs to install on a bookshelf that I wanted to raise from the floor. Once the legs were attached and I stood the bookcase up, it fell down when the mid-section of the hardware on three of the legs came apart.
Anonymous –
Of four plates in the pack, the Waddell tapered legs fit flush on only one. The angles on the other three were each different. Also, the pack only had 7 screws, not the 16 that would be required to attach all four top plates to the cabinet.
Anonymous –
To put it plainly, the plates, along with wooden legs, highly accented a card table I made for my daughter’s boyfriend. The table was made using an old cable spool. The plates made the addition of legs easy as pie.
Anonymous –
Fast install.
Anonymous –
Doing what it’s supposed to do. I had a little problem with the threading. It was 1/4 to 1/2 turn off from keeping the legs straight. Had to play with it and finally had to let one of the legs be not as tight as I would have liked. Better than having one leg diagonal. Bracing did the rest.
Anonymous –
Easy to screw on bottom of furniture to then apply legs. Makes legs very secure.
Anonymous –
Bought a pack to make a stool for my partner. The packaging’s adhesive isn’t very strong, so the plastic comes right off of the back, even if you don’t want it to, if you aren’t careful. Had to go back and get a second pack to replace the first that had opened prematurely. Finally got them home, went to screw the legs I’d gotten into the brackets… and they weren’t angled. More precisely, the main body of the bracket is angled, but the nut that the legs thread into, and the hole that said nuts are mounted in, were straight. Left the legs in and used their leverage to try and bend the nuts to the correct angle, which seemed to be working, at least until I flipped them over to find that rather than the sheet bending to compensate, instead the nuts’ “wings” were just breaking off, pretty clearly cast and on the cheaper side as far as hardware goes. You might be lucky and get a better set than I did, but I can’t say I recommend trying your luck if you have another option available.
Anonymous –
Poor quality control. I had to purchase @ return three packages before I was able to get four plates that provided a ‘no gaps’ and even fit. Why couldn’t I achieve this result with the initial purchase?
Anonymous –
40 year old chair for parts, emailed manufacturer, they sent me to a retailer – no parts. Went online found this part. CHAIR FIXED.
The only thing i was worry about was the center screw for the leg. No size mention in ad.
Anonymous –
Bought for my grand daughter’s nightstand. Out of the four plates, I could only use one. Two of the legs would not sit flush on the plate. The other had a nut that didn’t have a round opening, it was oval. Had to buy two other packages to get four plates I could use.
Anonymous –
the plates were not cut/ sized correctly and the angle was off. I had to purchase an additional pack just to have enough plates that work. I’m returning the ones that did not work with the Waddell legs that I purchased
Anonymous –
THIS PRODUCT HAD AN IDEAL PACKAGING. THE CUSTOMER COULD ACTUALLY SEE THE ENTIRE CONTENTS OF WHAT WAS INCLUDED, INCLUDING THE SCREWS FOR MOUNTING THE PLATES ON A TABLE BASE. THE BAE PLATE ARE EASY TO INSTALL AND WORKED OUT WELL
Anonymous –
Good Quality but priced higher than I really want to pay… I make baby stools and 4 legs and this pack equal $23 – With the other expenses and shipping its $40 for a $60 stool — $20 isn’t worth the time lol
This product is only worth it if you are making for yourself.
Anonymous –
Used angled leg brackets for a small dining table. Easy to install and legs look nice at a slight angle; however, there were 4 screws missing. That is an inconvenience if you don’t have spare screws.
Anonymous –
The angles weren’t aligned correctly so some leaned out more than others. I hit them with a hammer a few times to make it better but they should have been true out of the box
Anonymous –
You can turn several types of furniture into the mid century modern look by adding the tapered and capped leg. This little piece of hardware is essential for the installation of the legs. It makes install a snap. I’ve used these several times and I will continue to.
Anonymous –
Product has not only worked but compared to the last ones I bought from another retailer they are much more stable and durable. Thank you for delivering quality products.